TheMicro3D is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more.

How We Can Increase the Battery Life Of UPS(Uninterruptible Power Supply)

How increase battery life of UPS – When people start utilizing the uninterruptible power supply (UPS), individuals accept that there is no compelling reason to look after it.  As per information, the failure of UPS happens ⅓  due to battery failure. Along these lines, it is increasingly more imperative to reinforce the legitimate use and upkeep of UPS batteries for dragging out the assistance life of batteries and decreasing the disappointment pace of the UPS. 

Here we are providing some tips that are effective in increase battery life of UPS system.

Maintain the environmental temperature of UPS

Ecological temperature is a significant factor influencing the life of batteries. By and large, the ideal ecological temperature needed by battery producers is somewhere in the range of 20℃ and 25℃. The ascent of temperature can improve the release limit of batteries, the expense is the incredibly shortening life of batteries. As indicated by the test outcomes, when the natural temperature is over 25℃, the life of UPS will be diminished significantly for each 10℃ of increment. As of now, batteries utilized by UPS  are for the most part fixed lead-corrosive batteries that don’t have to keep up, and their service life is intended for a very long time, which can be accomplished uniquely in the climate needed by battery makers. On the off chance that the necessary ecological conditions, there will be extraordinary contrast in their service life. Also, the ascent of natural temperature will reinforce the synthetic movement inside the batteries, which will produce a great deal of warmth energy and advance the ascent of ecological temperature then again. This endless loop will quicken the shortening of UPS battery life. 

Regular charging and discharging of UPS battery 

The discharge and floating voltage in UPS batteries have been acclimated to the evaluated esteem at the time of leaving the manufacturing point. Whereas the discharge current increments with the expansion of the heap, so the heap ought to be changed sensibly being used, like controlling the number of microcomputers and other electronic gadgets. For the most part, the heap ought not to surpass 60% of the evaluated heap of uninterruptible force supply. 

The UPS batteries ought to be completely discharged each 2-3 months, and the time of discharging relies upon the limit and heap of batteries. After a full-load release, the UPS batteries ought to be re-energized for over 8 hours as per the guidelines. 

Reasonable using UPS correspondence capacity to screen the battery 

At the current time, large and medium-sized uninterruptible power supplies have the operational exhibitions of correspondence with microcomputers and program control. The microcomputer can speak with UPS by comparing programming on the microcomputer, interfacing UPS through sequential/equal ports, and running the program, essentially incorporating data request, boundary setting, timing sets, programmed closure, and alert. Through data requests, data like info voltage of power, the output voltage of UPS, load use proportion, usage proportion of battery limit, interior temperature, and recurrence of business force can be obtained. Through boundary setting, fundamental attributes of UPS, battery length, and caution of battery weariness can be set. 

Replacing the bad battery on time

The small, large, or medium-sized UPS are equipped with a powerful battery and their range goes from 3 to 80, or significantly more. These individual batteries are associated with circuits to shape a battery pack, so as to meet the necessities of the DC power supply of UPS. In the nonstop activity and utilization of UPS, it is unavoidable that the presentation of individual batteries will decay, and the capacity limit will neglect to meet the prerequisites and harm because of the distinction in execution and quality. At the point when one or a few batteries in the battery pack are harmed, the upkeep staff should check and test every battery to dispense with the harmed battery. When supplanting new batteries, we should attempt to buy the batteries of a similar sort and same maker. Try not to blend corrosive confirmation batteries in with fixed batteries, or the batteries of various particulars.

Leave a Comment